how to maintain a motorcycle

One question that comes to our mind very often is how to maintain a motorcycle.

In this Blog, we have tried to answer that question so that it could help you take care of your beloved so it could last long and doesn’t break down during track days. Periodic maintenance has great long-lasting benefits and also increases the life expectancy of your motorcycle engine and other components.

A motorcycle can typically endure 12 to 15 years as long as it has not been involved in any serious accidents or falls. If you own a high-end bike and have been attentive to its upkeep and maintenance, the lifespan of this vehicle may also extend. This is when replacing motorbike parts can be quite helpful.

Motorbikes require special care to keep them in the finest condition possible. Purchasing the proper motorcycle parts is essential to extending the life of your vehicle, especially when necessary.

Important Motorcycle Parts to Check Frequently

It’s crucial to regularly inspect vital bike components to identify whether it’s time to replace them. The critical motorcycle components listed below are those you should regularly inspect, especially before riding your bike, to determine whether you need to repair them right away.

Brake Pad

Squeezing the brake lever on your bike causes a series of events to occur in the brake system. To stop the motorcycle, it forces the brake pads to contact the rotors. The brake pads will eventually rust as a result of normal wear and tear.

Check your brake pads frequently to ensure your two-wheeled vehicle is operated safely. You must have them changed right away if they have shrunk to less than 2mm.

Tyres

Before using your tires, always check them. Keep an eye out for punctures, cuts, and cracks as well as over- and underinflated indicators. Bring your bike to the repair as soon as you notice these. Additionally, if the tread depth of your tire has already worn down to 1 to 2mm, don’t waste time replacing it.

Replace them every five years to ensure that your bike is still safe to be used on the roads, even if the tread wear on your tires isn’t too terrible after years of use.

Battery

Gas and the motorcycle’s battery are used to power it. Even though the majority of motorcycles have maintenance-free batteries, having the battery’s electrolyte level tested when getting an oil change can provide you the assurance that this component is working well.

Typically, motorcycle batteries have a two-year shelf life. You need to have them replaced after this time period.

Fork oil

The motorcycle’s fork is the component that joins the front wheel and axle to the main frame. The fork oil is housed in this component, which consists of two tubes, and is totally sealed. Bumps or unevenness in the road doesn’t have as much of an impact on the bike thanks to the fork oil.

Additionally, it is crucial for lubricating the parts of the bike that are used when it is moving. In the event that oil is seen dripping from the tubes, the fork seals should be changed right away. When you perform the yearly mechanical inspection on your bike, the fork oil should also be changed.

Drive shafts, belts, and bicycle chains

Three of a motorcycle’s most robust components are the drive shafts, belts, and bike chain. They normally last between 15,000 and 30,000 miles. The bike chain, however, needs to be kept in good condition and shouldn’t be too loose. Additionally, it needs to be kept tidy.
Ask your mechanic if it has to be replaced or tightened if it is too slack.

Spark plugs

When your motorcycle has traveled 10,000 miles, you must replace the spark plugs. Remove the spark plug right away if you see an abnormally large gap, an eroded center wire, a broken ground electrode, or any combination of these issues.

Motorcycle Parts to Upgrade

Investing in the best bike upgrades can also prolong the life of your motorcycle and even improve its performance.

Oil Cooling System

This add-on also referred to as a fan-assisted oil cooler regulates and keeps the temperature of the engine’s oil constant. With this innovation, you can be sure that the engine is always safeguarded and functions without issue even in the hottest temperatures.

Other brands or types of V-twin motorcycles and many Harley-Davidson motorcycle models can use this technology.

Rearsets

With the help of aftermarket rear sets, you may fine-tune how your lower body is positioned on the bike. As a result, you are able to tie yourself to your equipment while sitting more comfortably. Your upper body is free to perform the controls and turning of the bike better because of the more stable platform.

Auxiliary Lighting

In the late fall and winter, your motorcycle needs to be equipped with the proper lights if you frequently ride it at night. Riding at night can be easier with LED lights . Although halogen lights are also widely used, LED lights have greater advantages due to their lower energy consumption, increased lifetime, smaller size, and lower price.

Motorcycle Cover

Last but not least, even while it’s not in use, your bike needs to be adequately protected. A high-quality motorcycle cover can offer the required protection. It is preferable to wear a waterproof cover in the winter. This item is extremely helpful in shielding your bike from inclement weather, especially during the chilly, rainy months.