bikerbiker Aliwheels is a leading motorcycle parts supplier offering free shipping anywhere in the world on orders above $300. Please note that all of our motorcycle parts and accessories are certified and tested. With more than 10,000* products to choose from this is your one place to get the motorcycle part you need. Browse our vast inventory of motorcycle radiators, fairings, clutch plates, headlights, chains, and sprockets. biker
Logo
Login

Login

Cart

Lean Angle Blogs
Lean Angle Blogs
Moto Madness

In Parts & Accessories, Riding Guide
Posted

Having a motorcycle exhaust leak can be frustrating and can negatively affect your riding comfort. It compromises your bike’s performance and fuel economy and may produce an uncomfortably loud and uneven exhaust noise. But from now you’re insured, so don’t worry. We’ll lead you through the procedure of correcting that leak in this article so you can go back on the road with a bike that is screaming like a champion.

 

1. Diagnosing the Exhaust Leak:

Finding the cause of the exhaust leak is crucial before starting any repairs. Beginning with a visual inspection, pay particular attention to all joints, gaskets, and connections in the exhaust system. Look for rust stains, black carbon deposits, or obvious holes that might be evidence of a leak. Additionally, when the engine runs, pay attention to odd popping or hissing sounds. Use a smoke machine or water and soap mixed together and sprayed around the exhaust system while the bike is running to locate the leak’s exact location.

2. Replacing Gaskets and Seals:

Worn-out or broken gaskets and seals are one of the most prevalent causes of motorcycle exhaust leaks. By using the preceding diagnostic procedures, start by identifying the defective gasket or seal. To reach the affected region, remove the required parts. Remove the old gasket or seal with caution so as not to harm the adjacent components. To remove the dirt or residue, use a solvent or scraper to clean the mating surfaces. Install a fresh gasket or seal, ensuring it is seated and aligned correctly. Tighten the fasteners to the manufacturer’s suggested torque levels before reassembling the exhaust system.

3. Repairing Cracks or Holes:

Cracks or holes in the exhaust pipes may occasionally be the source of a motorcycle exhaust leak. To begin, carefully clean the afflicted region to get rid of any dirt, rust, or grime. High-temperature epoxy or exhaust repair tape can be used to patch up minor fractures or holes, depending on the extent of the damage. As directed by the package, apply the epoxy or securely wrap the tape around the damaged area. Give the repair substance enough time to cure or set. It could be essential to completely replace the damaged piece of the exhaust pipe if the damage is more severe.

4. Tightening Loose Connections:

Loose connections can also cause exhaust leaks. Check and tighten any loose bolts, clamps, or brackets throughout the exhaust system. To guarantee a tight fit, use a wrench or socket set. Avoid overtightening, as this might harm the parts or cause new leaks. After a brief test ride, check all connections again to ensure their stability.

Conclusion:

Correctly repairing exhaust leaks is essential for maintaining a motorcycle’s top performance and ensuring rider safety. By following the guidelines in this handbook, you can quickly detect, locate, and fix motorcycle exhaust leaks. Always remember to seek the assistance of a qualified motorcycle mechanic if you are hesitant or uneasy performing the repairs yourself. Enjoy the ride with a fully functional and sealed exhaust system!

 

(Commenting: OFF)

In General Blogs
Posted

Consider purchasing a motorcycle Long Boots if you’re seeking a rugged boot to wear when riding your bike or off-road vehicle or to enjoy other outdoor activities like hiking on rough terrain. And we’ll take you an intelligent one if you are prepping your motorcycle clothing for the winter! The ideal motorcycle Long Boots will provide your feet with defense, toughness, and comfort for all-day wear on various terrains in various kinds of weather!

Aliwheels has a broad selection of motorcycle leather racing boots to suit all tastes and price ranges. Our knowledgeable staff is dedicated to assisting you in finding the ideal pair of motorcycle boots (we always recommend Long Boots, and we have every reason to do this). Our motorcycle Boots are made with riders’ needs and concerns in mind because we are a rider-owned company. We are committed to giving you the greatest motorbike riding experience possible. Stop looking around and start purchasing with Aliwheels instead!

Aliwheels is all about making matters easy for our customers, and therefore we are here for you with a wide selection of reasonably priced options so you can pick the best motorcycle Long Boots. These are some of the best long boots on Aliwheels; you won’t regret purchasing them, and they are undoubtedly essential winter footwear (for those considering the winters – which you should). So, without further ado, let’s slip right in:

Professional Motorcycle Tall and Long Boots

Several customers have praised these solid motorcycle Boots for being excellent value, given their durability and protection for riding on highways and terrain. They are constructed with a plastic plate injection that protects your feet from damaging impact and a metal shank insert for support. They also have a metal toe guard to protect the sole.

With the lock-in snap and four-buckle closure, these motorcycle Long Boots are simple to put on, and when you ride on warm days, the wind and breathable interior of the boots will keep you cool. These synthetic leather motorbike boots will keep them safe from damaging heat. They also include a padded insole with heel support for comfort when riding.

Motorcycle Touring Long Boots

Customers have remarked that this straightforward and fashionable pair of Long Boots doesn’t require any break-in time. To keep you cool and comfortable while riding on warm days, they are built with a lightweight outsole, heel, and a breathable interior. These Long Boots even include a stylish, sub-inch heel to give you a little wedge as you go to and from your bike.

Thanks to the full-grain leather material and cement construction for long-lasting durability, you can depend on these boots for many rides. Even these riding shoes’ double-locking inner and outer zippers ensure their safety.

Motorcycle Dirt Long Boots

These Long Boots are fantastic since they were designed for more than just your weekend bike ride with buddies to the beach. They have a robust two-sole system that allows you to use them as work Boots or for other outdoor activities like fishing, hiking, and trail riding in your off-road vehicle. The rubber outsole of these boots gives traction on rocky terrain because it is slip-, oil-, and abrasion-resistant. They even include an inside fabric gusset that is smooth and protects your feet from sand and other objects.

Thanks to the breathable tongue and inner fabric, your feet will keep cool in these motorcycle Long Boots. They are also highly flexible while maintaining full stability thanks to their toe cap and ankle protection. In addition to being made of impact-resistant leather, the material resists wear and tear over time. Most of all, the detachable, cushioned inner foam of these motorcycle Boots makes them incredibly comfy. The strap and side zipper on these motorbike boots makes adjusting them simple.

Motorcycle Track Race Long Boots

Customers frequently comment on how comfortable these incredibly fashionable Motorcycle Boots are immediately out of the box, allowing you to go for a ride as soon as they are received. You can rely on these sturdy, protective Long Boots for the whole of the day thanks to the full-grain leather. The ankle-high style will keep your ankles comfortable and stable no matter how you move. Also, these boots offer an extremely light outsole and a breathable interior for comfort and cooling at any temperature. The twin side zippers on these boots are another feature that appeals to riders.

Harley Davidson Long Cruiser Boots

These casual-looking motorcycle Long Boots can be worn to work or out to dinner without changing your shoes after your ride, thanks to their polished toe and heel. You may bike to hiking and walking trails or the lake for fishing because they have an anti-slip rubber sole that offers improved traction on rocky terrain.

These Motorcycle Long Boots offer a breathable interior lining for comfort in warm weather, and the removable insole has cushioned memory foam that you can use as you see fit. The best part is that these boots have a pair of zippers so you can swiftly put them on when you’re rushing.

Conclusion

Think of a motorbike boot. Most likely, you’re thinking of tall, mid-shin-height leisure boots. Short boots and shoes have a place in the motorcycle world for projecting a more casual vibe. Nonetheless, the extra length of a tall motorcycle Long Boots is apparent regarding protection.

Long Boots for motorcycle help protect your ankles, shins, and calves from the surface below, as well as from hot exhaust pipes, pointed foot controls, and other hazards on your bike that you might encounter in an accident. In addition to greater impact, abrasion, and burn protection, motorcycle Long Boots offer exceptional weather resistance. The overlap between tall waterproof boots and waterproof pants prevents rain. Together with the boot’s functions, you want a style that you adore wearing. If you use our advice and peruse all of the alternatives on Aliwheels, you should be able to identify the precise motorcycle boots you need. If you want to discuss these products in more detail, don’t hesitate to contact us; our experts are here to help!

(Commenting: OFF)

In General Blogs, Parts & Accessories
Posted

Kawasaki motorcycle parts are made to function and suit your Kawasaki motorcycle properly. A large range of components is available for every Kawasaki make and model. Our selection of Kawasaki motorcycle parts includes what you need, whether you’re looking for cables, cylinder heads, or footrests. At Aliwheels, you can choose Kawasaki for a fantastic ride, whether designing the motorcycle of your dreams or searching for replacement parts.

Good Kawasaki motorcycle Parts will keep you at ease in various circumstances, and when you’re at ease, you ride better. The last thing a motorcycle rider needs is a distraction. Therefore, we bring you a great assortment of the best Kawasaki motorcycle parts and accessories directly sourced from Kawasaki.

Most motorcycle parts are made for more than crash protection. But good motorcycle parts can do more than just that! We will look at why one should bother about getting hands-on Kawasaki motorcycle parts and gears but as a hint: From performance to protection – Optimal motorcycle modifications always go a long way! So, without further ado, let’s slip into the importance of Kawasaki parts and then look at some of the gears and gadgets you should have!

Importance of getting good Kawasaki Motorcycle Parts

The most important benefit, though, is crash protection, and as those of us who have hit the pavement and been kept safe by our Kawasaki motorcycle parts will attest. It is better to have it than not to. When speed suddenly stops, the human body does not respond well. Do you have any memories of falling as a child while running? Do you still recall your bloody knees, palms, and shredded jeans? Remember how fast you traveled then and that even short journeys on a motorcycle will far exceed that.

At high speeds, the road surface resembles a massive belt sander. Good Kawasaki motorcycle parts are armored to protect your joints from collisions and are engineered to resist abrasion. It’s only sometimes possible to use the belt sander sparingly. In addition to the performance optimization, good Kawasaki motorcycle Parts can protect your bike and you as a rider. Therefore, the best action is to wear good protection and use parts and accessories that keep you and your bike optimized and shielded! Let’s look at some of the gears and gadgets that every motorcycle enthusiast must have:

Motorcycle Helmets

Research by Dietmar Otte found that 45 percent of motorcycle helmet impacts happen near the face and chin, which are not covered by open-face or three-quarter helmets. You should wear a full-face helmet if you crash into the pavement quickly.

Since they combine the ease of use of a three-quarter helmet with full-face protection, modular helmets are growing in popularity. Everybody has a different head, which varies in size and shape. Find a helmet that fits you ideally; manufacturers and models vary widely in size and shape. Weight, noise, and aerodynamics are additional factors to consider. You can use Kawasaki motorcycle helmets for your protection and to complete the ultimate Kawasaki look!

Motorcycle Disc Brakes

Motorcycle brake pads can improve stopping power. Safe riding requires regular brake repair. In Aliwheels’ online store, you may find everything you need, including brake pads, rotors, shoes, and lines! One of the most crucial parts of your bike is the brakes, but many riders need to be aware of the variety of alternatives available when changing the pads. Investigate the differences between organic, semi-sintered, and sintered motorcycle brake pads from all the leading manufacturers to determine which is best for your car.

Motorcycles Foot Controls

Motorcycle foot controls, such as foot pegs or floorboards, shift levers, and brake levers, come from the factory in a predetermined position. Changing these parts is a simple method to improve the comfort of your ride. With a huge selection of looks and styles from renowned companies like Royal Enfield, Suzuki, Triumph, and more, Aliwheels has thousands of possibilities for you to choose from! The key to a pleasant and safe ride is comfort, and these Kawasaki choices will let you alter the ergonomics and appearance of your motorcycle.

Motorcycles System Exhaust

A new exhaust system is likely the first improvement a new motorcycle, ATV, or UTV owner makes to their bike. Any rider will rejoice when they see this improvement, whether for a better sound or to increase power and torque. We at Aliwheels are your one-stop shop for everything involving motorcycle exhaust.

We provide various slip-ons, high-performance headers, mid-pipes, muffler packing, spark arrestors, and whole systems or complete exhaust pipes from leading brands. With the help of high-quality Kawasaki motorcycle parts, you can modify your bike’s appearance, sound, or weight.

Motorcycle Armor

Body armor for motorcycles shields you against collisions by absorbing energy that might otherwise be delivered to you. You want it to fit so it won’t move around in an accident, whether you buy it alone or as part of a piece of riding Kawasaki motorcycle parts. It ought to be loose and unrestrictive of movement.

You can modify it if your Kawasaki motorcycle parts have armor-compatible pockets. The back protector is the best thing you can improve. You can fit a nicer one in the pocket if the one in your jacket is floppy foam, or you can choose one that fits you without the jacket.

That is all from us!

Riding a motorcycle exposes you to high risk, can be physically demanding, and exposes you to dramatic weather differences. Kawasaki motorcycle Parts are readily available and can keep you safe in an accident, cozy in all weather, and less tired.

When operating a motorcycle, it should be regarded as essential. Include the cost of it in the bike’s overall cost. There is no such thing as being unable to afford high-quality Kawasaki motorcycle parts; lower the bike’s price until you can purchase the hand controls, footpegs, brakes, exhausts, suspensions, and other essentials required for riding it. Do we have anything left over? Notify us.

(Commenting: OFF)

In General Blogs, Parts & Accessories
Posted

Those interested in motorcycles know that installing motorcycle fairings is a fast and easy way to improve the appearance and performance of a motorcycle. Many different types of motorcycles can have fairings added to them. Motorcycle fairings are an excellent accessory because they improve your bike’s aerodynamic efficiency while giving it a more streamlined appearance.

Motorcycle fairings are available in a dizzying array of designs and materials. The addition of fairings to your motorcycle can increase its performance. Nevertheless, installing motorcycle fairings is a difficult task to undertake. On the other hand, you have no reason to be worried about anything at all. We have compiled a list of five suggestions that, when implemented, will make installing motorcycle fairings easier and more fruitful.

 

Motorcycle Fairings: The Assembly Process Described

Riding a motorcycle can be an exhilarating experience all on its own. It doesn’t matter if you’re starting or have been riding for years; having a few techniques that you know will work in your back pocket is always beneficial. You can get the most enjoyment possible by staying on top of your motorcycle’s routine maintenance and honing your riding skills.

In this article, you will find a presentation of five of the most important installation guidelines for motorcycle fairings. You should be able to repair the fairing of your motorcycle in a short time if you follow the steps outlined in this article. With these instructions as your guide, installing the motorcycle fairing is something you can start immediately.

Please take the time to read the entire manual

Before beginning, ensure you have everything you need to complete the task by reading the instructions thoroughly. If there are any accompanying drawings or diagrams, please study them carefully; before moving on to the next stage, ensure you thoroughly understand the previous ones. Verify that you have everything you need to complete the project before you begin. This is a major consideration. The instructions for the fairing kit you plan to use should be read in full before you begin the project. Certain fairing kits may call for additional, specialized tools to be properly installed.

Keep your Motorcycle locked up while you work on the installation

Taking precautions before installing the motorcycle fairings is important to avoid scratching or damaging the bike’s finish. Please do so to avoid the need for expensive repairs down the road. Use a blanket or soft fabric to cover the fuel tank and other exposed motorcycle areas.

This will keep the bike’s surface clear of loose hardware like fasteners that could cause injury to the rider or bystanders. As you attach the Motorcycle Fairings, your job is to make sure the bike doesn’t move around or topple over while you work. This will ensure the installation is completed with minimum disruption to your schedule.

It’s recommended that you recruit some help (Get some!

The weight and size of the fairings make installation difficult and time-consuming; having an extra set of hands-on hands can help complete this task. Having a trusted companion hold the fairings in place while you tighten the screws would be helpful.

Because of this step, any potential damage incurred during the installation process will be stopped. The assurance that everything is in its proper place will also be realized. Furthermore, the installation process will be more streamlined and effective if you have a second set of eyes to review your work to catch any mistakes you may have made.

Focus solely on successive steps at all times.

Since installing fairings is so challenging, beginning the installation process with simpler steps is advised. Before attaching the fairing, mount it using the included brackets or supports. The kit should come with everything you need to get started.

Before securing the fairing position, you must complete this first to ensure proper alignment. This will aid in making sure everything lines up properly. You can gain the confidence you need to finish the job if you start with the less difficult parts of the installation process and work your way up to the more difficult ones.

Be careful when you’re putting the Motorcycle Fairings on

Since installing fairings is so challenging, beginning the installation process with simpler steps is advised. Before attaching the fairing, mount it using the included brackets or supports. The kit should come with everything you need to get started.

Before securing the fairing position, you must complete this first to ensure proper alignment. This will help guarantee perfect alignment. You can gain the confidence you need to finish the job if you start with the less difficult parts of the installation process and work your way up to the more difficult ones.

Main Ideas

Following these five guidelines will make installing motorcycle fairings much easier and faster. Make sure you have a second set of hands, that your bike is secure, that you have read the instructions in their entirety, that you start with the simplest steps first, and that you take your time. If you follow these tips, not only will installing your motorcycle fairings be a breeze, but you’ll also end up with a bike that looks great and runs better than before!

Aliwheels is the only place to go if you need motorcycle fairings, as they offer a comprehensive selection. You can update your bike’s look to something more modern thanks to the extensive selection of fairings and accessories available, all of which are of the highest quality. We offer low prices and fast shipping so that you can install and run your new fairings in no time. For this reason, you shouldn’t waste time waiting around; instead, you should hurry to Aliwheels to take advantage of our incredible, unparalleled selection and pricing!

(Commenting: OFF)
Logo
+1-800-451-4177
Email Us
lean angle blog

Join Our Biker’s Community

Subscribe to our newsletters. Be in touch with the latest news, special offers and exciting sales.

Social Media Channels

Facebook Youtube Instagram Pinterest X-twitter
SSL Secured
Payment Method
Copyright © 2024, aliwheels.com All Rights Reserved.

Or login with your social account